• WhatsApp : +86 13003860308
  • 電子メール : David@tmaxcn.com
  • 電子メール : Davidtmaxcn@gmail.com
  • : No. 39, Xinchang Road, Xinyang, Haicang Dist., Xiamen, Fujian, China (Mainland)
製品
10L Planetary Vacuum Mixer

バッテリーパイロットライン用高速10L遊星分散型真空ミキサー

  • Model Number:

    TMAX-XFZH10
  • :

    Xiamne
  • MOQ:

    1
  • お支払い:

    L/C D/A D/P T/T Western Union
  • Delivery Time:

    45 days
製品の詳細

High Speed 10L Planetary Dispersion Vacuum Mixer for Battery Pilot Line


Equipment features:

Scope of application

1.1The powder and liquid of various common batteries are mixed and dispersed to finally obtain a uniformly mixed battery slurry. Very suitable for highly viscous processes.

1.2Applicable viscosity range1,200,000cP

Main parameters of equipment

2.1Lower barrel part

2.11Total design volume16L

2.12 Effective volume5-10L

2.13 Vessel inner diameter310mm

2.14 Inner depth of container220mm

2.15 Container material:Material contact portion 304

2.16 Temperature regulating jacket form: single layer jacket on barrel wall, used for cooling or heating; Single layer jacket at the bottom of the barrel for cooling or heating

2.17 Temperature regulating jacket interface: G3 / 8 ", with quick opening Union, jacket pressure 0.4MPa

2.18 Temperature regulating jacket circulation system: provided by the customer. It is recommended that the jacket inlet temperature is 8 , and the cooling water flow is > 3.5l/min

2.19 Discharge form: a G1 / 2 "three piece discharge ball valve at the bottom of the barrel

2.20 Design ambient temperature-10+120°C

2.21 Mobile mode: caster Mobile

2.2Mixing parts

2.21Working frequency5-50hz

2.22 Mixing power2.2kw

2.23 Agitator speed11-116rpm

2.24 Planetary case speed5-53rpm

2.25 Agitator diameter161mm

2.26 Agitator style: variable section spiral fried dough twist type, 90 ° spiral

2.27 Agitator material304

2.28 Linear speed of agitator0.08-0.8m/s

2.29 Number of agitators2pcs

2.30 Paddle to paddle distance7.5±2.5mm

2.31Distance between paddle and barrel wall3+1.5mm

2.32 Distance between paddle and bucket bottom2.5+1mm

2.3 Dispersed parts

2.31 Working frequency5-50hz

2.32 Dispersed power3KW

2.33 Dispersion speed613-6130rpm

2.34 Diameter of dispersion disc70mm

2.35 Dispersive disk style: zigzag

2.36 Dispersion disk material304

2.37 Dispersion linear velocity2.2-22m/s

2.38 Number of dispersing discs2

2.39 Number of dispersing shafts: 1

2.4 Wall scraping parts

2.41 Material of wall scraping bracket304

2.42 Material of wall scraping plate: polytetrafluoroethylene

2.43 Wall scraping speed: consistent with the speed of planetary case

2.44 Whether it is detachable: detachable design (the scraping wall must be removed during high viscosity process)

2.5 Base and lifting parts

2.51 Component material: carbon steel for high rigidity structure

2.52 Lifting mode: electric lifting

2.53 Lifting guide: high precision linear guide

2.54 Lifting stroke440mm

2.6 Upper barrel part

2.61 Upper barrel material304

2.62 Powder feeding port: DN50 quick assembly with mirror:1 PC

2.63 Liquid feeding port: ISO 1 / 2 "quick loading: 1PC

2.64 Spotlight DN50 :1 PC

2.65 Vacuum outlet: G1 / 2 "inner wire:1PC

2.66 Exhaust port: shared with vacuum port

2.67 Nitrogen port: G1 / 2 "inner wire:1PC

2.68 Digital vacuum gauge port: M14 * 1.5 internal thread metric thread interface:1PC

2.7 Control system:

2.71 Electrical cabinet: used to place low-voltage electrical components such as frequency converter

2.72 Operation panel: used to place buttons, knobs, touch screens, etc

2.73 PowerAC 3×380V±550Hz

2.74 Control mode: electric control

2.75 Power control and speed regulation mode: frequency converter startup and control

2.76 Cooling mode: air cooling

2.77 Operation mode: touch screen operation

2.78 Digital temperature display table: material temperature

2.79 Emergency stop button: 1PC

2.80Alarm system: over temperature alarm, over temperature alarm shutdown, alarm shutdown

2.81 Speed display: touch screen displays speed

2.82 Power indicator: 1PC

2.8 Safety interlock system

2.81 Emergency stop: press the emergency stop switch, and the equipment will stop immediately without any operation.

2.82 Start low-speed mixing: it can rotate while lifting the barrel

2.83 High speed dispersion: the barrel can be turned only when it is raised to the position

2.84 Safety lock during operation: when the machine is running and mixing, the mixing bucket cannot be lowered and opened.

2.85 Prevent vacuum pipeline backflow: special vacuum buffer tank design can effectively prevent vacuum pump oil from backflow to the mixing drum

2.86 Operation fault stop: the frequency converter is equipped with overload, overcurrent, overvoltage, leakage and lack of protection

2.87 Lifting and lowering of mixing bucket: the mixing bucket can only be lifted after it is in place.

2.89 If the mixing drum is not evacuated (normal pressure is not restored), it cannot be lowered.

2.90 The high-speed dispersion can be started only after the mixing bucket is raised in place.

2.91 After the mixing bucket is lifted in place, it is equipped with a locking protection system to prevent the mixing bucket from falling abnormally after rising to the high position during operation.

2.92 In the dry mixing stage, the agitator needs to rotate while lifting the bucket.

2.9 Other instructions

2.91 Temperature measuring probePt100

2.92 Temperature measurement method: the barrel wall mounted temperature measuring head detects the material temperature

2.93 Transmission component bearings: high speed components are imported bearings, and low speed components are domestic bearings

2.94 Oil seal: domestic brand, O-ring for static seal, mechanical seal for dynamic seal.

2.95 Mechanical seal lubricating oil: imported

2.96 Valves: domestic brands

2.97 Vacuum design demand: customers must provide their own vacuum system air extraction:4L/S2XZ-4

2.98 Vacuum holding-0.098MpaKeep the pressure higher than -0.085mpa for 24 hours, without leakage into the barrel

2.99 Total power:>5.2kw

2.100 Total weightabout 900kg

2.101 Equipment sizeL1530mm*W922mm*H1792mm

2.102 ColorWhite

2.103 Ground bearing900kg/

List of random wearing parts

SN

Name

Specification

Material

Qty

Remark

1.

Upper cover sealing rubber ring

ΦD×ΦN

silica gel

1

2.

Mirror base sealing ring

silica gel

2

3.

Filler gasket

silica gel

1

4.

High speed mechanical seal

C+SiC

1

5.

High speed synchronous belt

silica gel

1set

6.

Scraping plate

Teflon

1

7.

Mirror glass

Tempered type

2pcs

Supporting conditions

SN

Entry name

Standard requirements

1.

Workshop height

>2.5MA certain height is required for machine lifting and maintenance needs are considered; Clean and level

2.

Door size:

Height>2.5MWidth>1.5M

To ensure that the machine is transported in and out.

3.

Cooling water

To ensure the cooling requirements, it is better to have a forced cooling water supply system; If insulation is required in winter, hot water supply is required.

4.

Heating

In view of the cold weather in the north in winter, in order to prevent the hydraulic oil for lifting from condensation, it is necessary to ensure the indoor temperature > 20 º C to ensure the smooth lifting of the machine; And ensure the normal operation of the lubrication system

5.

Installation space

Refer to the general plan of the scheme for layout.

6.

Air source

57 kgf/cm²100 l/minPneumatic pump drive and other occasions.

7.

Others

No corrosive gas, liquid and explosive gas.


Detailed Images